Burning incense

Incense is composed of aromatic biotic materials. It releases fragrant smoke when burned. The term incense refers to the substance itself, rather than to the odor that it produces.

Many religious ceremonies and spiritual purificatory rites employ incense, a practice that persists to this day. Incense is also used in medicine and for its aesthetic value. The forms taken by incense have changed with advances in technology, differences in the underlying culture, and diversity in the reasons for burning it.^[1]

History

This section does not cite any references or sources. Please help improve this section by adding citations to reliable sources. Unverifiable material may be challenged and removed. (September 2008)

Incense sticks at Po Lin Monastery, Hong Kong

The use of incense dates back to biblical times and may have originated in Egypt, where the gums and resins of aromatic trees were imported from the Arabian and Somali coasts to be used in religious ceremonies. It was also used by the Pharaohs, not only to counteract unpleasant odors, but as they believed, also to drive away demons and gratify the presence of gods.

The Babylonians used incense extensively while offering prayers to divining oracles. It was imported into Israel in the 5th century BC to be used in religious offerings. It spread from there to Greece, Rome and India, where both Hindus and Buddhists still burn it in their rituals and at festivals. In India some 2000 years BC various writings mention 'perfumers' and 'incense sellers'. Evidence suggests oils were used mainly for their aroma.

Brought to Japan in the 6th century by Chinese or Korean Buddhist monks who used the mystical aromas in their purification rites, the delicate scents of Koh (high quality Japanese incense) became a source of amusement and entertainment with nobles in the Imperial Court during the Heian Era 200 years later.

During the Shogunate period in the 14th century, samurai warriors would perfume their helmets and armor with incense to achieve a proud aura of invincibility. It wasn't until the Muromachi Era during the 15th and 16th century that incense appreciation spread to the upper and middle classes of Japanese society.

Kōdō, or incense appreciation, has long popular in Japanese culture.

Composition

Throughout history, a wide variety of materials have been used in making incense. Historically there has been a preference for using locally available ingredients. For example: sage and cedar were used by the indigenous peoples of North America. ^[2] This was a preference and ancient trading in incense materials from one area to another comprised a major part of commerce along the Silk Road and other trade routes, one notably called the Incense Route.

The same could be said for the techniques used to make incense. Local knowledge and tools were extremely influential on the style, but methods were also influenced by migrations of foreigners, among them clergy and physicians who were both familiar with incense arts. ^[1]

Most recently, incensole acetate was isolated from Boswellia carterii and shown to be a potent TRPV3 agonist and cause anxiolytic-like and antidepressive-like behavioral effects in mice with concomitant changes in brain c-Fos activation, a marker for changes in neuronal activity. ^[3]

Natural solid aromatics

Some commonly used raw incense and incense making materials (from top down, left to right) Makko powder (抹香; Machilus thunbergii), Borneol camphor (Dryobalanops aromatica), Sumatra Benzoin (Styrax benzoin), Omani Frankincense (Boswellia sacra), Guggul (Commiphora wightii), Golden Frankincense (Boswellia papyrifera), Tolu balsam (Myroxylon toluifera), Somalian Myrrh (Commiphora myrrha), Labdanum (Cistus villosus), Opoponax (Commiphora opoponax), and white Indian Sandalwood powder (Santalum album)

The following fragrance materials can be employed in either direct or indirect burning incense. They are commonly used in religious ceremonies, and many of them are considered quite valuable. Essential oils or other extracted fractions of these materials may also be isolated and used to make incense. The resulting incense is sometimes considered to lack the aromatic complexity or authenticity of incense made from raw materials not infused or fortified with extracts.

Woods and barks Agarwood Cedar Sandalwood Cypress Juniper Cassia Seeds and fruits Coriander Harmala Juniper Nutmeg Star anise Vanilla

Resins and gums Benzoin Copal Frankincense Myrrh Labdanum Dragon's blood Storax Galbanum Elemi Camphor Sandarac Guggul Opoponax Tolu balsam

Leaves Patchouli Sage Bay Tea Balsam Roots and rhizomes Vetiver Orris Calamus Spikenard Galangal Couch Grass

Flowers and buds Clove Lavender Saffron Animal-derived materials Ambergris Musk Operculum

Liquid aromatics

Many essential oils and artificial fragrances are used for scenting incense. Incense deriving its aroma primarily from essential oils is usually cheaper than that made from unextracted raw materials. Even cheaper are artificial fragrances used in incense, which are derived from chemical synthesis. Liquid aromatics are usually added to a base formed from charcoal powder.

Essential oils Patchouli Cedarwood Sandalwood Jasmine Rose Ylang-ylang

Artificial scents Cannabis Strawberry Opium Queen of the Night Lily of the valley Watermelon

Combustible base

Charcoal based cone incense

The combustible base of a direct burning incense mixture not only binds the fragrant material together but also allows the produced incense to burn with a self-sustained ember, which propagates slowly and evenly through an entire piece of incense with such regularity that it can be used to mark time. The base is chosen such that it does not produce a perceptible smell. Commercially, two types of incense base predominate:

• Fuel and oxidizer mixtures: Charcoal or wood powder forms the fuel for the combustion. Gums such as Gum Arabic or Gum Tragacanth are used to bind the mixture together while an oxidizer such as Sodium nitrate or Potassium nitrate sustains the burning of the incense. Fragrant materials are combined into the base prior to formation as in the case of powdered incense materials or after formation as in the case of essential oils. The formula for the charcoal based incense is superficially similar to black powder, though it lacks the sulfur.
• Natural plant-based binders: Mucilaginous material, which can be derived from many botanical sources, is mixed with fragrant materials and water. The mucilage from the wet binding powder holds the fragrant material together while the cellulose in the powder combusts to form a stable ember when lit. The dry binding powder usually comprises about 10% of the dry weight in the finished incense. Makko (抹香・末香 incense powder), made from the bark of the tabu-no-ki tree (Machilus thunbergii) (Jpn. 椨の木; たぶのき), is perhaps the best known source of natural plant-based binder. In India a resin based binder called Jigit is used. In Nepal, Tibet, and other East Asian countries a bark based powder called Laha or Dar is used.

Types

Incense is available in various forms and degrees of processing. However, incense can generally be separated into direct burning and indirect burnings types depending on how it is used. Preference for one form or another varies with culture, tradition, and personal taste.

Indirect burning

Indirect burning frankincense on a hot coal

Indirect burning incense, also called non-combustible incense,^[4] is simply a combination of aromatic ingredients not prepared in any particular way or encouraged into any particular form, leaving it mostly unsuitable for direct combustion. The use of this class of incense requires a separate heat source since it does not generally kindle a fire capable of burning itself and may not ignite at all under normal conditions. This incense can vary in the duration of its burning with the texture of the material. Finer ingredients tend to burn more rapidly, while coarsely ground or whole chunks may be consumed very gradually as they have less total surface area. The heat is traditionally provided by charcoal or glowing embers.

The best known incense materials of this type in the West, are frankincense and myrrh, likely due to their numerous mentions in the Christian Bible. In fact, the word for "frankincense" in many European languages also alludes to any form of incense.

• Whole: The incense material is burned directly in its raw unprocessed form on top of coal embers.
• Powdered or granulated: The incense material is broken down into finer bits. This incense burns quickly and provides a short period of intense smells.
• Paste: The powdered or granulated incense material is mixed with a sticky and incombustible binder, such as dried fruit, honey, or a soft resin and then formed to balls or small cakes. These may then be allowed to mature in a controlled environment where the fragrances can commingle and unite. Much Arabian incense, also called Bukhoor or Bakhoor, is of this type, and Japan has a history of kneaded incense, called nerikō or awasekō, using this method.^[5] Within the Eastern Orthodox Christian tradition raw frankincense is ground into a fine powder and then mixed with various sweet smelling essential oils. Floral fragrances are the most common (rose being among the most popular), but citrus such as lemon is not uncommon. The incense mixture is then rolled out into a slab approximately 1cm thick and allowed to dry for a week or so, until the slab is quite firm. It is then cut into small pieces resembling in many ways, the original raw frankincense.

Direct burning

Incense coils hanging from the ceiling of an East Asian temple

Direct burning incense also called combustible incense,^[4] , generally requires little preparation prior to its use. When lit directly by a flame (hence the appellation) and then fanned out, the glowing ember on the incense will continue to smolder and burn away the rest of the incense without continued application of heat or flame from an outside source. This class of incense is made from a moldable substrate of fragrant finely ground (or liquid) incense materials and odorless binder.^[1] The composition must be adjusted to provide fragrance in the proper concentration and to ensure even burning. The following types of direct burning incense are commonly encountered, though the material itself can take virtually any form, according to expediency or whimsy:

• Coil: Extruded and shaped into a coil without a core. This type of incense is able to burn for an extended period; from hours to days and is commonly produced and used by Chinese culture
• Cone: Incense in this form burns relatively fast. Cone incense containing mugwort are used in Traditional Chinese medicine for moxibustion treatment.
• Cored stick: This form of stick incense has a supporting core of bamboo. Higher quality varieties of this form have fragrant sandalwood cores. The core is coated by a thick layer of incense material that burns away with the core. This type of incense is commonly produced by the Indians and the Chinese. When used for worship in Chinese folk religion, cored incensed sticks are sometimes known as Joss sticks.
• Solid stick: This stick incense has no supporting core and is completely made of incense material. Easily broken into pieces, it allows one to determine the specific amount of incense they wish to burn. This is the most commonly produced form of incense in Japan and Tibet.
• Incense blanks: This form are made off unscented dust and then immersed into any kind of essential or fragrance oil. It was made popular in American Flea markets by vendors who wanted their own style and often known as "dipped" or "Hand-dipped"
• Loose powder: The incense powder used for making direct burning incense is sometimes burned without further processing. They are typically packed into long trails on top of wood ash using a stencil and burned in special censers or incense clocks.

Direct burning incense of these forms is either extruded, pressed into forms, or coated onto a supporting material.

Production

Since they are burned with an outside heat source, indirect burning incense typically do not have conditions on how they are produce outside of smelling pleasant. Mixture of incense materials can be combined by powdering the raw materials and then mixed together with a binder to form pastes, which are then cut and dried into pellets. Incense of certain catholic sects are made using similar methods by powdering frankincense, mixing it with essential oils such at lemon oil, then allowing the mix to partially set before cutting them into individual cubes.

Poor quality cored incense. Note that the sticks are uneven in thickness and the supporting cores remain even after combustion of the incense

It is quite the opposite for direct burning incense. On top of producing a pleasant scent when burnt, this type of incense must burn completely to ash with a stable ember. Ideally the incense should burn slowly and evenly with no trace of the supporting core after burning. In order to obtain these desired combustion qualities, attention has to be paid to certain proportions in direct burning incense mixtures:

• Oil content: Resinous materials such as Myrrh and Frankincense must not exceed the amount of dry materials in the mixture to such a degree that the incense will not smolder and burn. The higher the oil content relative to the dry mass, the less likely the mixture is to burn effectively. Typically the resinous or oily substances are balanced with "dry" materials such as wood, bark and leaf powders.
• Oxidizer quantity: The amount of chemical oxidizer in gum bound incense must be carefully proportioned. Too little, and the incense will not ignite, too much, and the incense will burn too quickly and not produce fragrant smoke.
• Mixture density: Incense mixture made with natural binders must not be combined with too much water in mixing, or over-compressed while being formed. This either results in uneven air distribution or undesirable density in the mixture, which causes the incense to burn unevenly, too slowly, or too quickly.
• Particulate size: The incense mixture has to be well pulverized with similar size of particulates. Uneven and larged sized particulates will result in uneven burning and may smell inconsistent when burned.

The incense mixture can be extruded or pressed into shapes, which use water soluble binders like makko (抹香・末香).^[1] small quantities of water are combined with the fragrance and incense base mixture and kneaded into a hard dough. The incense dough is then pressed into shaped forms to create cone and smaller coiled incense, or forced through a hydraulic press for solid stick incense. The formed incense is then trimmed and slowly dried. Incense produced in this fashion has a tendency to warp or become misshapen when improperly dried, and as such must be placed in climate controlled rooms and rotated several times through the drying process.

In the case of cored incensed sticks several methods are employed to coat the sticks cores with incense mixture:

• Paste rolling: A wet malleable paste of incense mixture is first rolled using a paddle into a long thin coil. When this is done a thin stick is then put next to the coil and rolled together until the stick is center in the mixture and a correct thickness of the incense stick is achieved. The stick is the cut to the right length and dried.
• Powder coating: Coating is used mainly to produce cored incense of either larger coil (up to 1 meter in diameter) or cored stick forms. The supporting material, either thin bamboo or Sandalwood slivers, are soaked in water or a thin water/glue mixture for a short time. The bundle of thin sticks are then evenly separated then dipped into a tray of incense powder, consisting of fragrance materials and occasionally a plant based binder. The dry incense powder is then tossed and piled over the stick while they are spread apart. The sticks are then gently rolled and packed to maintain roundness while repeatedly tossing more incense powder onto the sticks. Three to four layers of powder are coated onto the sticks, forming a 2 mm thick layer of incense material on the stick. The coated incense is then allowed to dry in open air. Additional coatings of incense mixture can be applied after each period of successive drying. Incense sticks that are burned in temples of Chinese folk religion produced in this fashion can have a thickness between 1 to 2 cm.
• Compression: A damp powder is mechanically formed around a cored stick by compression similar to the way uncored sticks are formed. This form is becoming more commonly found due to the labor cost of producing powder coated or paste rolled sticks.

Burning incense

For indirect burning incense, pieces of the incense are burned by placing it directly on top of the heat source or on a hot metal plate in the censer or thurible.^[6]

In Japan a similar censer called a egōro (柄香炉, egōro^?) is used by several Buddhist sects. The egōro is usually made of brass with a long handle (柄, e^?)) and no chain. Instead of charcoal, makkō powder is poured into a depression made in a bed of ash. The makkō is lit and the incense mixture is burned on top. This method is known as Sonae-kō (Religious Burning).^[7]

For direct burning incense, an end of the incense is held against a flame or a heat source until the incense begins to turn into ash at the burning end. Flames on the incense are fanned out and the incense is allow to burn on its own.

Traditional methods

A spirit tablet with incense

Drying cored stick incense, Vietnam

Chinese incense

Main article: Chinese incense culture

There are many forms of Chinese incense and its use and formulation theory is strongly tied to Traditional Chinese medicine and are still referred today as "fragrant medicines" (香藥). Use of incense in dynastic times was as much for promotion of bodily wellbeing as much as for veneration and religious ceremonies. As with Japanese incense, agarwood (沈香, chenxiang) and sandalwood (檀香, tanxiang) are the two most important ingredients in Chinese incense.

Indian incense

Main article: Incense of India

Indian incense can be divided into two categories: masala and charcoal. Masala incenses are made of dry ingredients, while charcoal incenses contain liquid scents. Masala incenses have several subgroups.

Masala

Masālā is a word in Hindi (and other Indian languages) meaning "spice mixture". It is commonly used when referring to curries or other food dishes. Masala incenses are made by blending several solid scented ingredients into a paste and then rolling that paste onto a bamboo core stick. These incenses usually contain little or no liquid scents (which can evaporate or diminish over time).

• Dubars: A sub-group of masala incense. They often contain ingredients entirely unfamiliar in the West and contain very complex scents. They are usually very slow-burning and are quite sweet and spicy in scent. They contain both solid and liquid perfumes in a binder which never quite dries out, making the incense sticks soft to the touch.

• Champas: A sub-group of durbars. They contain a natural ingredient indigenous to India called "halmaddi". Halmaddi is a grey semi-liquid resin taken from the Ailanthus Malabarica tree. It smells like the flowers of the plumeria tree. Plumeria flowers are known as champa flowers in India, hence the name of the incense group. Halmaddi is hygroscopic which means it absorbs moisture from the air. This can cause champa incenses to have a wet feeling to them. Nag Champa is probably the most famous incense of the champa group.

• Dhoops: Another masala sub-group. They are an extruded incense, lacking a core bamboo stick. Many dhoops have very concentrated scents and put out a lot of smoke when burned. The most well-known dhoop is probably Chandan Dhoop. It contains a high percentage of Sandalwood.

Charcoal

Charcoal incenses are made by dipping an unscented "blank" (non-perfume stick) into a mixture of perfumes and/or essential oils. These blanks usually contain a binding resin (sometimes sandalwood) that holds the sticks' ingredients together. Most charcoal incenses are black in color.

Jerusalem temple incense

Main article: Ketoret

The Ketoret was the incense offered in the Temple in Jerusalem.

Tibetan incense

Main article: Tibetan incense

Tibetan incense refers to a common style of incense found in Tibet, Nepal, and Bhutan. These incenses have a characteristic "earthy" scent to them. Ingredients vary from the familiar such as cinnamon, clove, and juniper, to the unfamiliar such as kusum flower, ashvagandha, or sahi jeera.

Many Tibetan incenses are thought to have medicinal properties. Their recipes come from ancient Vedic texts that are based on even older Ayurvedic medical texts. The recipes have remained unchanged for centuries.

Japanese incense

Main article: Japanese incense

Stacks of incense at a temple in Japan

Agarwood (沈香　Jinkō) and Sandalwood (白檀　Byakudan) are the two most important ingredients in Japanese incense. Agarwood is known as "Jinkō" in Japan, which translates as "incense that sinks in water", due to the weight of the resin in the wood. Sandalwood is one of the most calming incense ingredients and lends itself well to meditation. The most valued Sandalwood comes from Mysore in the state of Karnataka in India.

Another important ingredient in Japanese incense is kyara (伽羅). Kyara is one kind of agarwood (Japanese incense companies divide agarwood into 6 categories depending on the region obtained and properties of the agarwood). Kyara is currently worth more than its weight in gold.

Uses of incense

Incense, being an article familiar to humanity since the dawn of civilization, has meant different things to the different peoples who have come to use it. Given the wide diversity of such peoples and their practices, it would be impossible to form an all-inclusive list of the ways in which incense has come to be used, since the methods and purposes of employment are as diverse and nuanced as those who have employed it.

Practical use of incense

Mosquito-repellent used in China, India, Canada, and Japan are usually manufactured in coil form and burned in a similar manner as incense

Incense fragrances can be of such great strength that they obscure other, less desirable odors. This utility led to the use of incense in funerary ceremonies because the incense could smother the scent of decay. Another example of this use, as well as of religious use is the Botafumeiro, which, according to tradition, was installed to hide the scent of the many tired, unwashed pilgrims huddled together in the Cathedral of Santiago de Compostela.

The regular burning of direct combustion incense has been used for chronological measurement in incense clocks. These devices can range from a simple trail of incense material calibrated to burn in a specific time period, to elaborate and ornate instruments with bells or gongs, designed to involve and captivate several of the senses. ^[8]

Incense made from materials such as citronella can repel mosquitoes and other aggravating, distracting or pestilential insects. This use has been deployed in concert with religious uses by Zen Buddhists who claim that the incense that is part of their meditative practice is designed to keep bothersome insects from distracting the practitioner.

Incense is also used often by people who smoke indoors, and do not want the scent to linger.

Aesthetic use of incense

Many people burn incense to appreciate its smell, without assigning any other specific significance to it, in the same way that the forgoing items can be produced or consumed solely for the contemplation or enjoyment of the refined sensory experience. This use is perhaps best exemplified in the kōdō (香道, kōdō^?), where (frequently costly) raw incense materials such as agarwood are appreciated in a formalised setting. Also, it is considered by some to be an aphrodisiac.

Religious use of incense

Incense burning at a temple in Taipei

Main article: Religious use of incense

Use of incense in religion is prevalent in many cultures and may have their roots in the practical and aesthetic uses considering that many religions with not much else in common all use incense. One common motif is of incense as a form of sacrificial offering to a deity.

Incense and health

Research into the effects of incense burning and health are unclear at this time.

Research carried out in Taiwan in 2001 linked the burning of incense sticks to the slow accumulation of potential carcinogens in a poorly ventilated environment by measuring the levels of polycyclic aromatic hydrocarbons (including benzopyrene) within Buddhist temples. The study found gaseous aliphatic aldehydes, which are carcinogenic and mutagenic, in incense smoke.^[9]

A survey of risk factors for lung cancer, also conducted in Taiwan, noted an inverse association between incense burning and adenocarcinoma of the lung, though the finding was not deemed significant.^[10]

In contrast, a study by several Asian Cancer Research Centers showed: "No association was found between exposure to incense burning and respiratory symptoms like chronic cough, chronic sputum, chronic bronchitis, runny nose, wheezing, asthma, allergic rhinitis, or pneumonia among the three populations studied: i.e. primary school children, their non-smoking mothers, or a group of older non-smoking female controls. Incense burning did not affect lung cancer risk among non-smokers, but it significantly reduced risk among smokers, even after adjusting for lifetime smoking amount." However, the researchers qualified the findings by noting that incense burning in the studied population was associated with certain low-cancer-risk dietary habits, and concluded that "diet can be a significant confounder of epidemiological studies on air pollution and respiratory health."^[11]

Boswellia incense has been shown to cause antidepressive behavior in mice. It activated the poorly understood ion channels in brain to alleviate anxiety and depression.^[12]

See also

Wikimedia Commons has media related to:

Incense

• Incense Road
• Kyphi
• Silk Road
• Smudge stick

Citations

• Silvio A. Bedini. (1994). "The Trail of Time : Time Measurement with Incense in East Asia". Cambridge University Press. ISBN 0-521-37482-0

History of Incense: http://www.nipponkodo.com/culture/column02/index.html

External links

• Incensole Acetate, a Novel Anti-Inflammatory Compound Isolated from Boswellia Resin, Inhibits Nuclear Factor-{kappa}B Activation. Mol Pharmacol. 2007 Dec;72(6):1657-64.
• Frankincense and Myrrh: The Botany, Culture, and Therapeutic Uses of the World's Two Most Important Resins
• Japanese Incense Tradition